Official Nebraska Government Website

Getting the Most from Your Energy Dollar...

Using Energy Wisely on the Farm and Ranch

There‚Äôs no avoiding this reality in farming:  Direct energy* accounts for about four percent of farm expenditures; indirect energy accounts for about six percent. Because small farms operate on profit margins well under 10 percent, efficiency measures that reduce energy costs can make a real impact.
*Direct energy consumption includes the use of diesel, electricity, propane, natural gas, and renewable fuels for activities on the farm. Indirect energy consumption includes the use of fuel and feedstock (especially natural gas) in the manufacturing of agricultural chemicals such as fertilizers and pesticides.

Tractor and Field Operations Energy Efficiency Checklist and Tips

It's harvest time once again and time to get the old equipment running smoothly. Field operations are one of the largest uses of energy on most farms, so it is helpful to examine reducing or eliminating operations for reductions in energy use. Conservation tillage systems conserve fuel by cutting down on the number of passes across fields.

Questions to ask:

  • Are you using radial tires, and are they properly inflated?
  • Is your tractor properly matched to the implement you are using?
  • Are you reducing the engine RPM speed when a larger tractor is used with a smaller implement?
  • Is your tractor wheel slippage excessive?
  • Is a change or reduction in tillage practices possible?
  • Is fuel storage shaded?
  • Have your engine fuel filters and air cleaner been replaced or serviced as recommended by the manufacturer?
  • Have your engine fuel injectors been cleaned and serviced properly?
  • Are you using a timer on your tractor's engine heater?

Facts and Actions: Tractor Operation

  • Proper maintenance as recommended by the manufacturer should be performed regularly on all field equipment. This includes replacing fuel filters, changing oil and filter, lubricating bearings, and having regular engine tune-ups. The tractor maintenance programs provided by implement dealers are an excellent way to have equipment (especially tractors and combines) checked and maintenance operations completed by professionals.
  • Properly inflate radial tires to significantly reduce slippage compared to bias ply tires.
  • Check the Nebraska Tractor Test Laboratory to find the efficiency of tractors in horsepower hours per gallon, which is similar to the miles per gallon rating for cars and pickups. This allows buyers to check and compare tractor efficiencies before purchasing. A common efficiency rating for field tractors is 17 to 19 horsepower hours per gallon. The higher the number, the more power produced from a gallon of fuel.
  • Use a machinery cost calculator to assist with selecting the most fuel-efficient combination of tractor size and equipment width. For example, a 23-foot chisel plow and 200-hp tractor consume 0.68 gal./acre of fuel. A larger 37-foot chisel plow and 310-hp tractor consume 0.57 gal./acre of fuel.
  • Avoid using small implements with large tractors. For the most efficient operation, the implement should be operated using the best matched tractor. If a larger tractor is used with small implements, use the principle of gearing up and throttling down to maintain proper ground speed will reduce fuel consumption. Be careful not to overload the engine when using this method.
  • Aim to maintain wheel slippage generally between 10% and 15% for two-wheel drive tractors and 8% to 10% for four-wheel drive tractors. Wheel slippage outside this range means the tractor is not weighted properly. If wheel slippage is greater than the recommended amount when a heavy load is pulled, more weight should be added in the form of cast iron wheel weights or fluid in the tires. Either form of weight is as effective as the other. If wheel slippage is less than the recommended amount, the tractor is carrying too much weight. This will cause the tires to sink in deeper than necessary and increase power requirements to move the tractor across the field, resulting in lower efficiency.
  • To significantly reduce tractor use and therefore save energy, money, and machinery wear and maintenance, use minimum or no-till practices. Other strategies for reducing fuel use include combining operations into one pass over a field or reducing the depth of tillage equipment.
  • Constantly variable transmissions (CVT) or infinitely variable transmissions (IVT) are new technologies that help improve fuel efficiency by using electronic control of transmission and engine speed for the most efficient operation. The operator sets the operation speed, and the controller determines engine speed and transmission setting based on load. These systems automatically perform shift up/throttle down.
  • Use guidance and auto-steer systems to reduce overlap on field operations, increase the ability to operate longer hours (darkness), reduce operator fatigue, and improve efficiency of operations.
  • Don't leave engine heaters plugged in overnight, if possible. Diesel tractor engines generally require 1 to 2 hours of heater operation before cold weather starts. A 1,000-watt engine heater will cost $150 a season to use (based on 10 hours per night, and $0.10/KWh, heating season 150 days long). Operating that same 1,000-watt heater for only 2 hours each morning will save $120, more than enough to pay for the cost of the timer.